ELECROM
IS MAXIMUM
FLEXIBILITY
FOR PRINTED
ELECTRONICS

It is a line of films, from PET specially treated for the best bonding of conductive inks to stretchable PU for wearable electronics.
It offers a variety of printing opportunities, from screen printing to UV, ensuring the best bonding of the ink with the substrate.
It includes rolls and cut sheets of different sizes, to suit the needs of each individual printers.

ELECROM is our line of PET films treated for printed electronics applications

FILMS FOR GRAPHIC OVERLAY

Designed for the preparation of membrane switches, these films have a hard coat treatment on one side and they are treated to ensure the best printing versatility on the opposite side.

FILM FOR CONDUCTIVE INKS

Designed to be printed with conductive inks, they are exposed to an advanced heat stabilization process, and therefore maintain the highest dimensional stability and perfect planarity through the printing process.

films for graphic overlay
(cover)

PRINT TEX: specially treated on one side for the best bonding with UV inks printed with inkjet technology, they can also be screen printed with solvent and UV inks. The other side features an antiscratch and antimicrobic matte finishing, which grants best bonding with gloss varnishes.

ELASTODUR: is a line of specialty films designed by Kimoto and marketed by Policrom. They are treated for screen printing and
UV inkjet inks. The finish on the anti-scratch side is available in three versions: fine matte, gloss and gloss antiglare.

heat stabilized pet films for conductive circuits

STS A.00-A.00: clear treatment for the bonding of inks, resins and adhesives, designed for clear conductive inks such as PEDOT or metallic nano molecules based inks.

STS H.02-H.02: special bonding treatment that increases the surface energy (wettability) ensuring a strong bonding of inks, resins and adhesives, designed for silver (conductive) and carbon (resistive) inks.

STS H.08-H.08: super bonding treatment that increases the surface energy (wettability) ensuring the strongest bonding of the inks, resins and adhesives.

Flexible and stretchable

ELECROM STRETCH TS D is a flexible and stretchable material designed to facilitate the screen printing process, to ensure strong bonding with conductive inks and dielectric varnishes and to provide adhesion to any fabric.

ELECROM STRETCH ENCAPSULATE D is designed to be laminated over Elecrom Stretch TS D to electrically insulate and protect the printed circuit; an additional circuit can also be printed on its exposed surface to create multilayer circuit structures.

ELECROM STRETCH TS D

ELASTIC POLYURETHANE (TPU) FILM FOR PRINTING ELECTRONIC CIRCUITS 

ELECROM STRETCH TS is a high-stretch film for applications such as: pressure sensors, medical devices, wearables, sensors for automotive and other industrial
applications. It is available in white and transparent versions and features unique properties thanks to its exclusive structure:

1 THE UPPER (PRINTABLE) SIDE is designed to facilitate the printing process:
the matte surface prevents the film from sticking to the mesh; it is heat resistant well over 150°C, ensures high stretching properties and a good consistency of the conductive track. It ensures a strong bond to most types of conductive inks and dielectric pastes
2 THE LOWER (HEAT SEALABLE) SIDE activates at 150°C to bond with any type of textile
3 THE PROTECTION LINER is made with thermostabilized PET to provide a flat surface during printing and to prevent thermal shrinkage

ELECROM STRETCH ENCAPSULATE D

ELASTIC POLYURETHANE (TPU) FILM FOR PRINTING ELECTRONIC CIRCUITS

ELECROM STRETCH ENCAPSULATE D is the new high-stretch film for wearable electronics available in both white and transparent versions.
It can be used either for the encapsulation of circuits printed on Elecrom stretch TS or as an additional layer printed with conductive inks

1 THE UPPER (HEAT SEALABLE) SIDE is designed to match the characteristics of Elecrom Stretch TS D and perfectly laminate to it
2 THE LOWER (MATTE HEAT RESISTANT) SIDE
• when used for encapsulation, its matte surface provides a soft hand feel to the finished circuit;
• when used for the printing of an additional circuit, it facilitates the printin process: the matte surface prevents the film from sticking to the mesh; it is heat resistant well over 150°C, ensures high stretching properties and a good consistency of the conductive track
3 THE PROTECTION LINER is made of silicone paper that facilites handling throughout the process and is removed after the transfer onto the textile

ELECROM STRETCH MED TS

ELECROM STRETCH MED TS is a thin, highly stretchable film made from medical-grade TPU and supported by a heat-stabilized liner.
Designed for printing conductive circuits and sensors used in medical devices that are laminated onto textiles or other substrates, it brings flexibility and comfort for the patient.

1 THE UPPER (PRINTABLE) SIDE matte printable TPU layer for conductive inks and dielectric pastes; prevents mesh sticking, highly elastic

2 THE LOWER (HEAT SEALABLE) SIDE heat-sealable TPU layer, activates at 130–150 °C to bond to textile

3 THE PROTECTION LINER heat-stabilized PET liner for flatness and minimal shrinkage

ELECROM TS TAPE

ELECROM TS TAPE is a heat-stabilized adhesive PET film designed to maintain the registration of printed TPU films while they are removed from the PET protection liner, positioned and transferred onto textiles. Withstands transfer temperatures up to 160°C and removes cleanly without leaving adhesive residue.

1 THE UPPER (HEAT STABILIZED PET) SIDE transparent heat-stabilized PET for maintaining the dimensional stability during transfer step

2 THE LOWER (HEAT RESISTANT) SIDE PSA adhesive layer to bond with TPU film

3 THE PROTECTION LINER is made of silicone ized liner 

ELECROM SPACER resistant to lamination temperature (up to 160°C) TPU film with both heat-sealable sides supplied on a paper liner.
Suitable for die-cutting and lamination. Designed to provide spacing between layers in multilayer printed TPU sensors.
Available in transparent color.